Machinable Pitbull® Clamps
The popular Pitbull® Fixture Clamp is now available in a machinable version. The clamp has positive down force and a very low gripping profile, reducing material cost and number of operations.
The Machinable Pitbull® Clamp is made of A2 tool steel and heat treated to about 43RC for long life, yet still machinable. There is additional material on the clamping face to allow for machining a radius. It is available in two sizes with 6,000 and 12,000 lbs. (26000 and 50000 N) of holding force. A dowel pin is included in each package to locate clamp while machining radius.
Inch
Part
No. | | Description | A | B | C | D* | E | F | Clamp
Width | Screw
Size | Holding
Force (Ft/lbs) | Max Torque
(Lbs) | Total
Throw | Dowel
Pin | Clamps
per pack |
|---|
| 26077 |
|
Tool Steel, Machinable |
.400 |
.450 |
1.00 |
.250 |
.710 |
1.075 |
1.00 |
3/8-16 |
6,000 |
30.0 |
.050 |
1/8 |
4 |
| 26088 |
|
Tool Steel, Machinable |
.600 |
.640 |
1.50 |
.375 |
.770 |
1.70 |
1.50 |
1/2-13 |
12,000 |
108.3 |
.075 |
1/4 |
2 |
* D – minimum clamp height.
Metric
Part
No. | | Description | A | B | C | D* | E | F | Clamp
Width | Screw
Size | Holding
Force (N) | Max Torque
(N.m) | Total
Throw | Dowel
Pin | Clamps
per pack |
|---|
| 56077 |
|
Tool Steel, Machinable |
10.16 |
11.43 |
25.4 |
6.35 |
18.0 |
26.9 |
25.4 |
M10 |
26,000 |
40.6 |
1.27 |
3.18 |
4 |
| 56088 |
|
Tool Steel, Machinable |
15.24 |
16.26 |
38.1 |
9.52 |
19.6 |
42.6 |
38.1 |
M12 |
50,000 |
145.0 |
1.90 |
6.35 |
2 |
* D – minimum clamp height.
