The Loc-Jaw® system was conceived to simplify, and allow greater tooling access and more versatility securing your parts when 4th and 5th axis machining. Designed to hold raw stock without a pre-op using the carrier method, penetrating material using the Knife-edge grippers or holding machined surfaces with the Blunt-edge grippers installed.
- Unique design allows access to bottom of workpiece
- Ability to hold parts from .500″ to 4.00″ or up to 1 Meter with optional extension kit
- 6,000+ lbs of holding force gripping on only .125″ of material
- Knife-Edge grippers designed to penetrate into material up to .060″ deep. Blunt Edge Grippers are also included for non-marring applications. All grippers heat treated A2.
- Centering Disk included for Loc-Jaw® base
- Set of locating pins included. (Liners installed in base)
- Blunt-edge grippers with #2 or #3 grit carbinite coating are recommended for high speed machining on hard alloys
Using Extension Kit
PATENT #9,216,484
Torque
(Ft-lbs) | Holding Force
(lbs) |
|---|
| 10 |
2,000 |
| 15 |
3,000 |
| 20 |
4,000 |
| 25 |
5,000 |
| 30 |
6,000 |
*Max torque of 25 f. lbs.
using Knife Edge grippers
on material > 40Rc due to
point contact.
Part
Number | Description |
|---|
| 14500 |
Loc-Jaw® System
Ships fully assembled with all tools required |
|
| 14525 |
Loc-Jaw® Extension Kit
Includes base plate with rails, threaded rod 1 meter long, and
locking nut with spacer |
Replacement Parts
Part
Number | Description |
|---|
| 14501 |
Loc-Jaw® Support Bolt #1 (M10 x 45mm) |
| 14502 |
Loc-Jaw® Support Bolt #2 (M10 x 65mm) |
| 14503 |
Loc-Jaw® Support Bolt #3 (M10 x 90mm) |
| 14504 |
Loc-Jaw® Support Bolt #4 (M10 x 110mm) |
| 14508 |
Loc-Jaw® Combo-Edge Grippers (2 per pack) – 1 side knife edge, 1 side blunt edge with Tungsten Carbide coating |
| 14518 |
Loc-Jaw® Jaw Set – includes 2 Jaws, 4 Combo-Edge Grippers & Screws |
| 14520 |
Loc-Jaw® Rail Set – includes 4 rails, Screws, Dowel Pins |
